If you’re looking to renovate your kitchen, you’ll faced a dilemma. You love the beautiful granite counter-top , but the cabinet below it seems to be old or worn-out for this moment.
A majority of people are trying to upgrade their kitchen cabinets however, not the countertop particularly if they’re on a tight budget. What if you could improve the cabinetry in your kitchen without having to change countertops? What advice would expert plumbers have to offer?
There is a benefit to be thankful for. You can make the necessary changes to the cabinets in your kitchen without having to remove the countertop. It is necessary to purchase the latest cabinets at hardware stores, then remove the cabinet underneath the countertop, taking care. Following that, you’ll be able to install the cabinet that is older. You can also make use of studs to keep the countertop while you are waiting.
Can You Replace Kitchen Cabinets Without Replacing Countertop?
You can replace the kitchen cabinet without harming the countertop. In addition, the process is simpler than many think. Furthermore, doing this DIY repairs to kitchen cabinets could help you avoid having to pay for professionals like plumbers and woodworkers.
Be sure to provide enough support for the countertop constructed from stone or wood prior to the time you take it off of the cabinet’s base cabinets as well as the frame. Because the countertop is a substantial structure, you should provide it with enough support so it can stand in the way of replacement.
It is suggested to install studs on the countertop so that it won’t fall from the top, damaging the entire cabinet. We’ll be using studs of 2X4 in this instance.
How to Remove Kitchen Cabinets Without Removing Countertop?
It is crucial to know the. You could swap the kitchen cabinet that is old and by newer ones without cutting the countertop. The question is , what is the best way to get rid of cabinets without damaging countertops inside your home?
Many plumbers will suggest many things, the most effective way to tackle changing the cabinet. You don’t need to be concerned regarding the technical aspect of the cabinet.
Step 1: Loosening the Cabinet Installation Screws
If you take a look inside cabinets in your kitchen there are several screws that connect to the cabinet, as well as to the walls behind it. The screws keep the kitchen cabinet against walls. The screws need to be removed one at a time to prepare the cabinet to be removed.
It is important to consider two conditions in order to accomplish this. You must think about two requirements
- Do you know if the cabinet was constructed before flooring was installed? You may not be able to take the cabinet off completely in this scenario because it is connected to the flooring in your kitchen.
- Consider the design of your toe’s base and how it is constructed. In certain cases, the base of your toe may not be the work piece itself. It’s made of cabinets directly. If that’s the case, it’s impossible to take off the cabinet without damaging it. It is imperative to remove the cabinet’s boxes to replace the cabinets with new ones.
Step 2: Cutting the Plumbing Area Sides
Most of the time , the cabinet’s backside is attached with the pipes. This can cause you to struggle to get cabinets off the countertop beneath. It is crucial to make sure that you don’t damage the plumbing installation during the process.
It is possible to use either a saber or salzsaw to complete the job. Use the saw that you feel comfortable with for greatest outcomes. Once you’ve found the best saw for you then you can use it to cut the plumbing of the kitchen. It is near the cabinet.
When you cut around the plumbing, make sure your cuts are large enough. They should be sized so that it can slide over the kitchen sink. Don’t rush to cut corners, or you’ll end up damaging your plumbing.
Other cutting methods:
Many people have reported finding the use of the sabersaw or salzsaw to be difficult. Therefore, it’s recommended to use a different, but efficient method of cutting. It is a great way to cut the back of cabinet doors in kitchens, separating this from any plumbing areas surrounding it.
It is recommended that you tap the cabinet’s walls with the most force possible to lift them from the location where you place them. Once you’ve knocked them out, the cabinet’s rear, try to take these walls out by one at a time. Be careful not to damage any plumbing installations.
Step 3: Using the Studs for Countertop Support
As we’ve said before, kitchen countertops , including stone and granite countertops are extremely heavy. This is why they are not able to provide adequate support and could fall off the top, causing damage to the entire cabinet installation.
We’re using 2”x4 4” Studs for this. Furthermore, the studs need to have enough strength to hold the heavy countertop. If you’re taking off one side of the cabinet, put the stud over it, to ensure that the countertop is properly supported. Make use of the same stud-mounting method on the other sides to make sure the countertop is in good condition.
Step 4: Inspecting the Cabinet Walls
Because the cabinet’s wall is located close to pipes, the wall surfaces are moist. This leads to the development of mold and mildew. This could cause harm to your kitchen cabinets and also the walls. Furthermore the development of mold isn’t healthy for you.
Take note of the cabinets’ walls and pipes. If you see any signs of growth of mold, use an industrial mold killer to get rid of the mildews and mold. In addition, you must employ dampening removal products on the walls to ensure they are dry. This will stop the walls from getting damp in the near future.
In the event that the mold has grown to the point that the walls are damaged, consider seeking assistance from a qualified contractor. Also, examine the plumbing and see if there is any leaks. If you’ve discovered leaks, use Teflon tape to close them off accurately.
Step 5: Install the New Cabinet
If you are sure that the walls haven’t scratched anymore then you can put up the cabinet. The walls must be pushed of the cabinet up against the sides you cut previously near the plumbing points. Once the cabinet is set up in a safe way it is possible to remove the studs supporting the countertop.
Once you have done that, you can tighten the screws one at a time one at a time, and then look for a gap within the plumbing. It is essential to fill it with the right substance such as cement or Teflon to ensure the durability.
Can You Replace Countertops Without Damaging Cabinets?
A majority of kitchen remodel projects involve cabinet removal, but there are those who are seeking to upgrade their countertops, too. The best part is that it is feasible to replace countertops constructed of granite or stone easily , without damaging cabinets.
If the countertop has been getting stained or wears away, then you should think about changing it out with new one. However, you should be very careful when taking off any granite countertops since it is both heavy and strong. We recommend calling a professional to complete the job. It might be costly but you’ll prevent destroying the cabinet and causing injury to yourself.
Conclusion
What if you could put in kitchen cabinets without having to change countertops? It’s generally simple and easy to remove the kitchen cabinet and replace it with countertops and studs to support the cabinets. Most important to do is stay in a positive state of mind and follow a step-by step method with care and caution. If you adhere to our guidelines on the removal of kitchen cabinets and you’ll find it simpler than you imagined it.
